TR ENG

CANKIRI KARATEKIN UNIVERSITY Bologna Information System

Course Information

Course Information

Course Content

Course's Contribution to Prog.

ECTS Workload in Relation

ECTS- Workload Calculation Tool

Program Information

Mission and Vision

Program Learning Outcomes

Course Struct. & ECTS Credits

Course Catalogs

Course & Program L. Outcomes

TYYC Level Qualification

TYYC Core Area Competencies

Admission Requirements

Access to Further Studies

Qualification Awarded

Final Examination

Assessment and Grading

Head of Dept. & Coord.

Educational Staff

Görüş Bildir Print
  • Course Information
    • Course Title Code Semester Laboratory+Practice (Hour) Pool Type ECTS
    Technical and Vocational drawing CMT213 FALL 3+1 Faculty E 3
    Learning Outcomes
    1-Draws angles, curves and polygons.
    2-Outputs the projections of lines and planes. Plots the exact length of a line and the actual size of the plane. It makes adequate appearances of parts. It can produce auxiliary and special appearances as needed.
    3-Knows and applies standard dimensioning rules (TS 88).
    4-Knows and Draws Professional Circuit Elements
    5-Draws Professional Circuits
  • ECTS / WORKLOAD
    • ActivityPercentage

    (100)

    		NumberTime (Hours)Total Workload (hours)
    Course Duration (Weeks x Course Hours)14456
    Classroom study (Pre-study, practice)000
    Assignments0000
    Short-Term Exams (exam + preparation) 0000
    Midterm exams (exam + preparation)4011010
    Project0000
    Laboratory 0000
    Final exam (exam + preparation) 6012424
    0000
    Total Workload (hours)   90
    Total Workload (hours) / 30 (s)     3 ---- (3)
    ECTS Credit   3
  • Course Content
    • Week Topics Study Metarials
    1 TECHNICAL DRAWING Technical Drawing Information, Paper types and standard paper sizes, Lines used in technical drawing and standard writing information and standard writing work r1
    2 A. Geometric Drawings: 1) Lines and Perpendiculars 2) Angles r1
    3 A. Geometric Drawings: 3) Drawing Regular Polygons in Circles r1
    4 A. Geometric Drawings: 4) Tangents 5) Tangent Circles and Arcs r1
    5 B. Projection and view drawing 1. Definition of projection, definition of elements and projection planes. Dimensioning r1
    6 B. Projection and view drawing 2.Lines and planes drawing the projections 3. The full length of the line and the true size of the plane drawing. r1
    7 B. Projection and view drawing 4. Required appearances of the parts boot. r1
    8 PROFESSION OFFICIAL Tabular Drawing of Symbols Used in Electronic Circuits r1
    9 Tabular Drawing of Symbols Used in Electrical Circuits r1
    10 Tabular Drawing of Symbols Used in Control Systems r1
    11 Tabular Drawing of Symbols Used in Digital Electronic Circuits r1
    12 Tabular Drawing of Symbols of Semiconductor Elements Used in Electronic Circuits r1
    13 Electrical Circuit Drawings r1
    14 Electronic Circuit Drawings r1
    Prerequisites -
    Language of Instruction Turkish
    Responsible Dr. Nurettin Gökşenli
    Instructors -
    Assistants -
    Resources r1 Lecture Notes
    Supplementary Book -
    Goals 1. To understand the basic drawing concepts related to Technical and Professional Painting. 2. To make a view from perspective. 3. To be able to interpret a drawn picture by reading it. 4. Drawing of Professional Elements and their circuits related to Electrical, Electronic and Control Systems.
    Content A. Geometric Drawings B. Projection and Viewing C. Dimensioning D. Drawing of Professional Elements E. Drawing of Professional Circuits
  • Program Learning Outcomes
    • Program Learning Outcomes Level of Contribution
    1 Follows the developments in his profession. 3
    2 He uses the computer in his job. -
    3 Reads the schematic and applies it to the circuit. 3
    4 Understands, interprets and transfers the job description received from the upper units to the lower units. -
    5 It organizes work. -
    6 Makes applications that require advanced technology and features and transfers them to sub-units. -
    7 Knows the importance of teamwork. -
    8 Takes responsibility and risk 4
    9 Communicates. -
    10 Decides 5
    11 Performs needs analysis 4
    12 It solves the problem. 3
    13 Writes a report. -
    14 He can start his own business. -
    15 Uses equipment, maintains and repairs, and keeps records. 3
    Çankırı Karatekin Üniversitesi  Bilgi İşlem Daire Başkanlığı  @   2017 - Webmaster