TR ENG

CANKIRI KARATEKIN UNIVERSITY Bologna Information System

Course Information

Course Information

Course Content

Course's Contribution to Prog.

ECTS Workload in Relation

ECTS- Workload Calculation Tool

Program Information

Mission and Vision

Program Learning Outcomes

Course Struct. & ECTS Credits

Course Catalogs

Course & Program L. Outcomes

TYYC Level Qualification

TYYC Core Area Competencies

Admission Requirements

Access to Further Studies

Qualification Awarded

Final Examination

Assessment and Grading

Head of Dept. & Coord.

Educational Staff

Görüş Bildir Print
  • Course Information
    • Course Title Code Semester Laboratory+Practice (Hour) Pool Type ECTS
    Computer Aided Machine Design-I CMK104 SPRING 2+0 C 3
    Learning Outcomes
    1- Can explain basic concepts such as CAD & CAM, can recognize the AutoCAD screen and menus and can apply the opening and closing of an existing drawing, SAVE, END, and QUIT commands in order to exit the drawing screen. Can use the commands such as LIMITS, UNITS, GRID, SNAP, ORTHO so as to prepare AutoCAD screen for a drawing and can explain the coordinate systems (absolute, relative, and polar)
    2- Line draws by applying circle and arc drawing commands (LINE, CIRCLE, ARC, VIEWRES). Makes applications by using APERTURE and POINT commands with settings related OSNAP command options.
    3- Can use the viewing commands (ZOOM, PAN, REDRAW, REGEN), the corner rounding and chamfering commands (FILLET, CHAMFER), partial wiping commands (BREAK, TRIM).
    4- It uses move and sequencing commands (MOVE, COPY, ARRAY, OFFSET), mirror image and rotation commands (MIRROR, MIRRTEXT, ROTATE) in the drawing.
    5- It uses other drawing commands (ELLIPSE, POLYGON, RECTANGLE, TRACE, FILL, SOLID, DONUT, POLYLINE, SKETCH). It applies extension and stretching commands (EXTEND, STRETCH). Uses scale and origin (SCALE, ORIGIN) commands. Instructors teach new commands updated in the software.
  • ECTS / WORKLOAD
    • ActivityPercentage

    (100)

    		NumberTime (Hours)Total Workload (hours)
    Course Duration (Weeks x Course Hours)14228
    Classroom study (Pre-study, practice)12224
    Assignments0000
    Short-Term Exams (exam + preparation) 0000
    Midterm exams (exam + preparation)4011010
    Project0000
    Laboratory 021020
    Final exam (exam + preparation) 6011212
    0000
    Total Workload (hours)   94
    Total Workload (hours) / 30 (s)     3,13 ---- (3)
    ECTS Credit   3
  • Course Content
    • Week Topics Study Metarials
    1 A. Basic CAD Concepts and Introduction to AutoCAD 1. Explanation of basic concepts such as CAD & CAM K1. AutoCAD 2009, Gökalp BAYKAL K2. AutoCAD 2007, Prof.Dr.Süleyman YALDIZ K3. Bilgisayar Destekli Tasarım 2009 (Ders Notu), Yrd. Doç. Dr. Mehmet Ali DÖNERTAŞ
    2 2. Demonstration of AutoCAD screen and menus K1. AutoCAD 2009, Gökalp BAYKAL K2. AutoCAD 2007, Prof.Dr.Süleyman YALDIZ K3. Bilgisayar Destekli Tasarım 2009 (Ders Notu), Yrd. Doç. Dr. Mehmet Ali DÖNERTAŞ
    3 3. Application of SAVE, END, and QUIT commands in order to exit the drawing screen 4. Application of opening and closing an existing drawing K1. AutoCAD 2009, Gökalp BAYKAL K2. AutoCAD 2007, Prof.Dr.Süleyman YALDIZ K3. Bilgisayar Destekli Tasarım 2009 (Ders Notu), Yrd. Doç. Dr. Mehmet Ali DÖNERTAŞ
    4 5. Use of commands such as LIMITS, UNITS, GRID, SNAP, ORTHO so as to prepare AutoCAD screen for a drawing K1. AutoCAD 2009, Gökalp BAYKAL K2. AutoCAD 2007, Prof.Dr.Süleyman YALDIZ K3. Bilgisayar Destekli Tasarım 2009 (Ders Notu), Yrd. Doç. Dr. Mehmet Ali DÖNERTAŞ
    5 B. Basic AutoCAD commands 6. Explanation of coordinate systems (absolute, relative, and polar) 7. Application of drawing commands (LINE, CIRCLE, ARC, VIEWRES) K1. AutoCAD 2009, Gökalp BAYKAL K2. AutoCAD 2007, Prof.Dr.Süleyman YALDIZ K3. Bilgisayar Destekli Tasarım 2009 (Ders Notu), Yrd. Doç. Dr. Mehmet Ali DÖNERTAŞ
    6 8. Application of OSNAP command options related to the settings and use of APERTURE and POINT commands K1. AutoCAD 2009, Gökalp BAYKAL K2. AutoCAD 2007, Prof.Dr.Süleyman YALDIZ K3. Bilgisayar Destekli Tasarım 2009 (Ders Notu), Yrd. Doç. Dr. Mehmet Ali DÖNERTAŞ
    7 9. Use of viewing commands (ZOOM, PAN, REDRAW, REGEN) K1. AutoCAD 2009, Gökalp BAYKAL K2. AutoCAD 2007, Prof.Dr.Süleyman YALDIZ K3. Bilgisayar Destekli Tasarım 2009 (Ders Notu), Yrd. Doç. Dr. Mehmet Ali DÖNERTAŞ
    8 10. Use of fillet and chamfer commands (FILLET, CHAMFER) K1. AutoCAD 2009, Gökalp BAYKAL K2. AutoCAD 2007, Prof.Dr.Süleyman YALDIZ K3. Bilgisayar Destekli Tasarım 2009 (Ders Notu), Yrd. Doç. Dr. Mehmet Ali DÖNERTAŞ
    9 11. Application of partial deletion commands (BREAK, TRIM) 12. Use of creation commands (MOVE, COPY, ARRAY, OFFSET) K1. AutoCAD 2009, Gökalp BAYKAL K2. AutoCAD 2007, Prof.Dr.Süleyman YALDIZ K3. Bilgisayar Destekli Tasarım 2009 (Ders Notu), Yrd. Doç. Dr. Mehmet Ali DÖNERTAŞ
    10 13. Use of mirroring and rotating commands (MIRROR, MIRRTEXT) K1. AutoCAD 2009, Gökalp BAYKAL K2. AutoCAD 2007, Prof.Dr.Süleyman YALDIZ K3. Bilgisayar Destekli Tasarım 2009 (Ders Notu), Yrd. Doç. Dr. Mehmet Ali DÖNERTAŞ
    11 14. Application of other drawing commands (ELLIPSE, POLYGON, RECTANGLE, TRACE, FILL, SOLID, DONUT, POLYLINE, SKETCH) K1. AutoCAD 2009, Gökalp BAYKAL K2. AutoCAD 2007, Prof.Dr.Süleyman YALDIZ K3. Bilgisayar Destekli Tasarım 2009 (Ders Notu), Yrd. Doç. Dr. Mehmet Ali DÖNERTAŞ
    12 15. The use of SCALE, ROTATE and ORIGIN commands K1. AutoCAD 2009, Gökalp BAYKAL K2. AutoCAD 2007, Prof.Dr.Süleyman YALDIZ K3. Bilgisayar Destekli Tasarım 2009 (Ders Notu), Yrd. Doç. Dr. Mehmet Ali DÖNERTAŞ
    13 16. Use of extending and stretching commands (EXTEND, STRETCH) K1. AutoCAD 2009, Gökalp BAYKAL K2. AutoCAD 2007, Prof.Dr.Süleyman YALDIZ K3. Bilgisayar Destekli Tasarım 2009 (Ders Notu), Yrd. Doç. Dr. Mehmet Ali DÖNERTAŞ
    14 17. Instructors will teach new commands made available, as the software is updated in time K1. AutoCAD 2009, Gökalp BAYKAL K2. AutoCAD 2007, Prof.Dr.Süleyman YALDIZ K3. Bilgisayar Destekli Tasarım 2009 (Ders Notu), Yrd. Doç. Dr. Mehmet Ali DÖNERTAŞ
    Prerequisites -
    Language of Instruction Turkish
    Responsible Assistant Prof. Dr. M. Ali DÖNERTAŞ
    Instructors -
    Assistants -
    Resources K1. AutoCAD 2009, Gökalp BAYKAL K2. AutoCAD 2007, Prof.Dr.Süleyman YALDIZ K3. Bilgisayar Destekli Tasarım 2009 (Ders Notu), Yrd. Doç. Dr. Mehmet Ali DÖNERTAŞ
    Supplementary Book YK1. AutoCAD 2007, Arif GÖK-Kadir GÖK
    Goals 1. Have grasped the basic principles of computer aided drawing and design (CAD) 2. Be able to draw 2D drawings in computer environment using AutoCAD software 3. Be able to save the drawings made and modify previously made drawings
    Content A. Basic CAD Concepts and Introduction to AutoCAD 1. Explanation of basic concepts such as CAD & CAM2. Demonstration of AutoCAD screen and menus 3. Application of SAVE, END, and QUIT commands in order to exit the drawing screen 4. Application of opening and closing an existing drawing 5. Use of commands such as LIMITS, UNITS, GRID, SNAP, ORTHO so as to prepare AutoCAD screen for a drawing B. Basic AutoCAD commands 6. Explanation of coordinate systems (absolute, relative, and polar) 7. Application of drawing commands (LINE, CIRCLE, ARC, VIEWRES)8. Application of OSNAP command options related to the settings and use of APERTURE and POINT commands 9. Use of viewing commands (ZOOM, PAN, REDRAW, REGEN) 10. Use of fillet and chamfer commands (FILLET, CHAMFER) Midterm test 11. Application of partial deletion commands (BREAK, TRIM) 12. Use of creation commands (MOVE, COPY, ARRAY, OFFSET)13. Use of mirroring and rotating commands (MIRROR, MIRRTEXT) 14. Application of other drawing commands (ELLIPSE, POLYGON, RECTANGLE, TRACE, FILL, SOLID, DONUT, POLYLINE, SKETCH) 15. The use of SCALE, ROTATE and ORIGIN commands 16. Use of extending and stretching commands (EXTEND, STRETCH) 17. Instructors will teach new commands made available, as the software is updated in time
  • Program Learning Outcomes
    • Program Learning Outcomes Level of Contribution
    1 Has the basic Mathematics and Science knowldege. -
    2 Can comprehend the machine drawing, and draw the pictures of machine elements in accordancance with the rules both traditionally and on computer. 5
    3 Knows and applies machining and metal forming methods. Uses the the benches that are used in machining and metal forming. -
    4 Can make measurement and quality control in the field of machine. -
    5 Recongnizes the material, knows thermal process and selects the proper material for manufacturing. -
    6 Processes the materials with cutting tools and in accordance with the cutting variables with the proper speed and feed rate. -
    7 Designs the machine materials with a computer and forms the programme for computer controlled bench and processes. 5
    8 Knows the materials and symbols used in hydraulic and pneumatic systems. Makes a hydraulic and pneumatic circuit design. -
    9 Uses computer, prepares prepsentations and forms database files. -
    10 Can calculate the strength of the materials according to the static and dynamic variables. -
    11 Uses computerized drawing, design and manufacturing programmes related to the his/her vocation. 5
    12 Recognizes the tools of position, velocity, pressure, force used in the machine industry and explains the working systems of them. -
    13 Knows the basic principles of management and communication techniques and laws of work. -
    14 Plans the manufacturing, prepares the process cards, distributes the responsibilities and controls. -
    15 Follows the developments related to the manufaturing higher technicians. -
    Çankırı Karatekin Üniversitesi  Bilgi İşlem Daire Başkanlığı  @   2017 - Webmaster