Week
|
Topics
|
Study Metarials
|
1
|
Basic and Derived Units approved by the international system (SI)
|
K1. Chapter 1
|
2
|
working principles of Rotary coil galvanometer
|
K1. Chapter 2
|
3
|
Use of Rotary coil galvanometer as ammeter
|
K1. Chapter 2.1
|
4
|
Use of Rotary coil galvanometer as voltmeter
|
K1. Chapter 2.2
|
5
|
Use of Rotary coil galvanometer as serial and parallel type ohmmeter
|
K1. Chapter 2.3
|
6
|
Multimeters
|
K1. Chapter 3
|
7
|
Alternating current and alternative voltage measurement
|
K1. Chapter 4
|
8
|
Working principles of electrodynamics measurement device
|
K1. Chapter 4.1
|
9
|
Working principle of the revolving iron plated measurement device
|
K1. Chapter 4.2
|
10
|
Working principle of revolving magnetic measurement device
|
K1. Chapter 4.3
|
11
|
Power and Work (Energy) measurements
|
K1. Chapter 5
|
12
|
Circuit Elements and measurement of parameters.
|
K1. Chapter 5.1
|
13
|
Measurement with. Oscilloscope
|
K1. Chapter 6
|
14
|
Industrial Measurements and Transducers
|
K1. Chapter 7
|
|
Program Learning Outcomes |
Level of Contribution |
1
|
Organizes work. Makes preparations for work.
|
2
|
2
|
Recognizes and uses machinery and equipment used in manufacturing, control, maintenance and commissioning processes in the factory. Knows the physical demands of electricity in the factory.
|
3
|
3
|
Performs commissioning and control operations in the factory. It detects faults
|
4
|
4
|
Performs periodic/protective maintenance of machinery and equipment. Eliminates malfunctions of electrical machinery and equipment.
|
4
|
5
|
Maintains and repairs the Protective/Safety installation.
|
3
|
6
|
Maintains and repairs internal and external installations. Installs machinery, equipment and installations.
|
3
|
7
|
Carries out activities related to professional development.
|
3
|
8
|
Evaluates the advantages and disadvantages of materials used in the electrical engineering industry
|
3
|
9
|
Reads and interprets engineering drawings and diagrams. Planning and designing. Interpret bar charts, critical-path-networks, assembly diagrams, circuit and schematic diagrams.
|
2
|
10
|
Executes the discovery process. Performs inspection, testing and acceptance procedures.
|
4
|
11
|
Establishes the facility of lighting and power systems. Supervises the installation of transmission and distribution systems.
|
1
|
12
|
Placement, classification and adjustment of materials and equipment related to the system. Makes the selection, classification and adjustment of cable machinery and equipment suitable for the working environment.
|
2
|
13
|
Knows where to apply the law-based regulations on electrical sources, health and safety in the workplace. Applies the techniques detailed in standards and regulations.
|
1
|
14
|
Checks and repairs the installation.
|
4
|
15
|
Makes teamwork. Communicates.
|
4
|